Cortex Security Surveillance Products

The COR-ACC940 Wiegand proximity cardreader is an advanced access control device in a grey ABS case that uses a built-in bicolored LED and beeper to provide users with a visual and audible indication that a card has been scanned. It can operate in standalone mode or in networking configurations. This indoor proximity card reader works great and has an LED to indicate positive card read, and a buzzer. Great for interior doors and areas where access must be monitored or controlled. Best when...

The COR-ACC950 proximity card reader is an advanced access control device in a weather-proof case that uses an LCD panel and LEDs to provide users with a visual indication that a card has been successful scanned. A beeper provides audio feedback. It can operate in network or standalone mode ( detects mode automatically). Control mode, card capacity and card type are assignable by user directly. Maximum distance is approx. 18 cm (7 inches), depending on weather conditions and setup. Constructed...

The COR-ACC960 proximity card reader is an advanced access control device in a hardened zinc alloy weatherproof metal case that uses a touchpanel keypad for PIN entry. It also has a mini transducer that emits an audible “beep” when a successful operation is performed. It can be programmed for PIN and card, or PIN only, or card only operation. The hardened case provides a substantial barrier to vandalism and physical attacks and the sealed face helps keep the unit weatherproof. Best when used...

The COR-ACC970 proximity card reader is an advanced access control device in a zinc alloy weatherproof metal case that provides an LCD panel used for programming and to pass messages to the user The design is weatherproof and vandal resistant which makes it suitable for outdoor applications. Built-in watchdog and anti-tamper functions. Easily integrated with other CORE access products. This advanced card reader is designed for outdoor placement and contains a door control relay. It's resistant...

Ideal for outdoor applications Standard Wiegand Interface to controller Compatible with all standard access control systems Cost-effective UHF long read range passive tags Adjustable between 860-960MHz by order Wiegand and RS-485 communication 1 Bi-Color LED indicator Perfect for parking garage management

The COR-HTBS has a 4 inch pigtail which allows you to connect cameras to the DVR without space restraints. Boosts video signals up to 1300ft (depending on cable quality and video signal) without power. Works with analog and analog high definition signals. This passive pair balun with built in surge protector offers a convenient and cost effective solution to transmitting video signal over 2 wire conductor (we recommend CAT5E/CAT6 twisted pair). Main Features Boosts video signals up to 1300ft...

This passive video balun connects a BNC coax cable to 8-conductor twisted pair cable (RJ-8 or RJ-45 type connector). It balances impedance and acts as an electrical filter, reducing noise and improving video quality.

Programming Keyboard used with ACC-890 Reader.

Cortex Access Reader for standalone or network systems12 character numeric keypadVisual feedback: 1 red/green LEDAudible feedback: Internal transducer (buzzer/beeper)Keypad will lock for 30 seconds after continuous error operation11 sets of time codesUp to 120 holiday schedulesBuilt-in watchdog to prevent system haltingSupport delay relay auto-relock functionRS-485 support for networking (via controller or directly)User assigns control mode, card capacity and card typeRF Frequency / Reading...

SDD Options If you have more than 4 PTZ cameras then you will want to ask about the COR-RSD8 The COR-RSD8 provide a way to take a single input signal (in RS232 or RS485 format) and duplicate and distribute it across multiple outputs simultaneously. The COR-RSD8 has 8 outputs and the input signal can be RS232 or RS485. Output signals are RS485. This type of simultaneous transmission can be useful for pan/tilt/zoom cameras (PTZ), point of sale devices (POS) and access control equipment. When you...

In-line metal splice. Nickel plated with teflon insulated copper core.

Sold in bags of 10, with colored rings for coding cables for identification.