The Cortex 8-port PoE switch provides seamless integration of Power over Ethernet (PoE) functionality, allowing you to conveniently power and transmit data to compatible devices over a single Ethernet cable. This eliminates the need for additional power outlets and simplifies cable management, making it ideal for IP cameras, VoIP phones, wireless access points, and other PoE-enabled devices.
The unit is fully integrated with security monitoring features that ensure a high level of performance. The product's uplink gigabit transfer rates assure crisp visuals and smooth transmission while delivering fast packet-forwarding functionality. Allow enough bandwidth for continuous high-definition video streams.
The PoE switch supports the IEEEE802.3af / at PoE standard and uses an advanced sensing algorithm, so only terminal devices that accept the IEEEE802.3af / at PoE standard need to be wary of harm to private standard PoE or non-PoE devices. Automatic recognition of PoE demand, speed, duplex, and usage of the Auto Uplink cable, easy and convenient to use, plug and play.
PoE switches are needed in a distributed data architecture to simplify deploying IP-based network cameras, NVRs, and wireless access points (APs). These devices are often hung from the ceiling or the wall with no power outlets available. Hardware power outlets are unnecessary when deploying PoE. The connection from the Cortex PoE Switch is more flexible, the wiring is simpler, flexible, and extendable, and the power wiring layout restrictions in the home and office network are eliminated.
The Intelligent power management activates when electrical equipment power exceeds the normal power output; the system will cut off the power supply of the ports after 1-2 minutes and will reexamine the individual ports before resupply.
Main Features
- Store and forwarding, support port isolation
- 10 10 /100M adaptive RJ45 port, 8 port with PoE
- Support two lighting of uplink port
- Low power consumption, no fan design
- Full-Duplex or Half-Duplex adaptive
- Supports IEEE803.3.af/af standards
- Can provides 15.4W / 30W per port
- Automatic detection and recognition PD device
witch in accordance with IEEE803.3.af/af and
power supply for the device
PORT AND PERFORMANCE
RJ45 Port
- Port number:10
- PoE port number: 8
- Port type: RJ45 adaptive
- Port Rate: 10/ 100M
- Cable type: CAT5 or better
- Protocol standard IEEE 802.3i 10 BASE T:
- IEEE 802.3u 10 BASE-TX:
- IEEE 802.3 x Flow Control:
- IEEE 802.3 af/at Power over Ethernet
Performance specifications
- Data store and forwarding
- Backplane bandwidth: 1.8G
- Transfer mode: Full-Duplex or Half-Duplex adaptive
- Addressing: 48-bit MAC address
- Network delay: 100Mbps to 100 Mbps, less than 20 ms under 6-4byte frame
- LED indicators for each Port: ACT. LINK indicator
- LED indicators for each Device: Power and PoE indicator
- Port protection Meets IEC61000-4-2 (ESD) plus or minus 15KV (air) plus or minus 8KV (contact) and can withstand energy of 8/20us 24A (12A)
POE *
- PoE Support IEEEE802.3af / at (15.4W / 30W)
- PoE power supply parameter single port: 15.4W /30 W
- MAX Power: 125 W Serials
- Power supply mode data line 1/2 (+). 3/6 (-): spare line 4/5 (+). 7/8 (-) optional
- Power Supply Distance Maximum power distance with CAT5 UTP; 100 meters
POWER*
- External Power DC48V / 4.16A
ENVIRONMENT *
- Authentication CE / LVD
- Working Temperature 0°C ~ 55°C / 32°F ~ 131°F
- Storage Temperature -20°C ~ 70°C / -4°F ~ 158°F
- Humidity Non-Condensing 10% ~ 90%
MECHANICAL *
- Dimensions L* W* H 280mm x 180mm x 44mm 11.2” x 7.0 “ x 1.7” inches)
- Color Black
- Cortex Security compatibility