Sales | Tech Support | 830am - 530pm EST
Your cart is empty!
The EZ-Pass proximity card reader is designed for outdoor placement. Made for visibility, the large display is easy to see. LEDs and a beeper provide feedback. Programming may be done by plugging in the keyboard (sold separately).Constructed of tough aluminum alloy.
Solid aluminum brackets with hardware kit and instructions for use with our COR-ACC150 300 pound magnetic lock.This aluminum bracket are predrilled and designed for easy installation. Model COR-ACC3Z COR-ACC150: 300lb magnetic lock Dimensions: 250mm x 48mm x 30mm (9.84" x 1.89" x 1.18")
Solid aluminum brackets with hardware kit and instructions for use with our COR-ACC300 600 pound magnetic lock.This aluminum bracket are predrilled and designed for easy installation. Model COR-ACC3Z COR-ACC300: 600lb magnetic lock Dimensions: 250mm x 48mm x 30mm (9.84" x 1.89" x 1.18")
12 character numeric keypadVisual feedback: 1 red/green LEDAudible feedback: Internal transducer (buzzer/beeper)Keypad will lock for 30 seconds after continuous error operation11 sets of time codesUp to 120 holiday schedulesBuilt-in watchdog to prevent system haltingSupport delay relay auto-relock functionRS-485 support for networking (via controller or directly)User assigns control mode, card capacity and card typeRF Frequency / Reading range 125 kHz / 10-18cmNetworking: RS-485, 9600, N, 8,...
This red illuminated button is mounted on a metal plate that can be secured to a wall near the door it effects. The wide operating temperature range makes it suitable for a number of environments.
When a "fail-secure" electric door lock looses power its default position is to lock (or secure) the door. Application of power is required to open (unsecure) the door. This type of door strike should be used with a good degree of forethought and suitable caution with respect to personnel who may become trapped in the event of a power failure. Always provide a secondary stage manual hand lock that can be released during emergencies.
High Security Cortex Biometric access reader with controller. Multi-stage security requires a card and a fingerprint to stop casual wandering from someone who picked up a lost card (or someone who stole a card). Biometric plus reader and doorbell function incorporated. The COR-ACC999 is an access control device that can be used in stand-alone mode or in a network. It uses optical technology to read fingerprints pressed on its scanning surface. A set of LEDs and a beeper give the user (and...
This aluminum bracket are predrilled and designed for a COR-ACC500 and similar products. Model COR-ACC12Z COR-ACC500: 1200lb magnetic lock Dimensions: 250mm x 60mm x 50mm (9.84" x 2.36" x 1.97")
The COR-ACC890BIO Cortex biometric finger print and proximity card reader is designed for outdoor or indoor placement. Made for long life performance with an aluminum security frame and sealed front panel. The on-board controller, relay and input/output triggers perform independently for standalone applications or can be networked via RS-485 or TCP/IP networks. Multi-finger enrollment assures fast access of secure areas. This sophisticated reader is ideal for professional installations that...
The COR-ACC890KP proximity card reader is designed for outdoor or indoor placement. Made for visibility, the large display is easy to see. LEDs and a beeper provide feedback. An illuminated touchpad and slim body design allows placement in low light tight areas.Constructed of tough zinc alloy.This unit's communication interface allows for RS-485 and TCP/IP.
Proximity Card Reader with Advanced Access Control Device in a Weather-Proof case. The COR-ACC980IP proximity card reader is an advanced access control device in a weather-proof case. It reads proximity cards and has an illuminated touchpanel to accept personal identification numbers (PINs). When a user presents a card, an audio (beeper and visual bicolor red/green LED) feedback indicates the card is recognized. For additional security, the touchpanel can be programmed to require PIN entry. It...
The COR-ACC980 (and IP addressable model COR-ACC980IP) proximity card reader is an advanced access control device in a weather-proof case. It reads proximity cards and has an illuminated touch-panel to accept personal identification numbers (PINs). It can operate in network or standalone mode. Maximum card read distance is approximately 7 inches. Constructed of tough ABS plastic, aluminum alloy and sealed against the weather.