Support  | Order 2017 Catalog  | Spec Sheets |


Outdoor Camera Housing with Built-In Heater & Blower& Infrared

This clamshell enclosure is designed for outdoor installation. It has an internal heater to keep the camera working in cold weather. A small fan circulates air on the inside to prevent condensation and fog on the inside of the glass front panel.

This clamshell camera enclosure is designed for outdoor installation. Of course, it could also be used indoors as well.

A lockable latch on the back of the camera housing prevents tampering (lock not included).

Please contact us for a specification sheet that covers this product.

  • Clamshell design
  • Sealed camera enclosure
  • Aluminum construction
  • Baked finish
  • Internal customizable bracket
  • Dimensions: 14 3/4" x 5 1/2" x 4 1/4"
  • Internal dimensions: 4 1/8" wide, 3 3/4" deep, and approximately 8.5 " to 9.5" long, (exact available space will be determined by the shape and lens style of your camera)

Heater/Blower specifics:

  • Voltage: 24VAC
  • Current draw: approximately 840mA (nominal)
  • Heater:
    • ON at 15°C (59°F)
    • OFF at 25°C (77°F)
  • Blower:
    • ON at 40°C (104°F)
    • OFF at 30°C (86°F)