COR-ACC995:Biometric Fingerprint reader with Keypad, Proximity Card Reader
We've coupled a proximity card reader with a biometric fingerprint sensor to create a door/portal access control device for locations that require identity confirmation with controlled access.
This proximity access card reader is coupled with a biometric fingerprint sensor for extra security. Maximum distance is approx. 15cm (5.9 inches). Constructed of tough ABS plastic.
Best when used with our controller, model COR-ACC1000 COR-ACC1000.
- Designed for indoor installation
- Short response time
- Standalone or use with PC (software included)
- Large fingerprint capacity (up to 4500) &high recognition rate
- Backup recognition mode for pool fingerprints, password or ID card
- Master card assignable
- Card capacity: 10,000 users
- One RS-485 port supported for networking
- Fingerprint database download/upload supported
- Built-in watchdog to prevent the system from halting
- External reader port 26/34 bit Wiegand format for anti-pass-back.
- Alarm function available (tamper, force entrance, door open too long)
- Keypad locks for 30 seconds, while continuous error operation
- Universal serial port supported for LED display, printer, lift controller, ETC
- Lift control: 5,000/32 stops
- Access mode: card only, card or PIN, card and PIN
- Fingerprint access mode: card &fingerprint, card or PIN &fingerprint, card &PIN &fingerprint, 4 digit user number &fingerprint
- Matching mode: High end optical sensor 500 dpi resolution @ 8 bit gray scale
- Area of input: 18mm x 16mm
- Panel display: English, French, Italian, Danish, Greek, Spanish
- External reader port: suitable for all WG, ABA reader, 125K, 13.56M (Mifare) or 2.4G reader
- Networking: RS-485, 9600, N, 8, 1
- Door relay: 12VDC @ 2A NO/NC/COM 0.1-600 sec. / latch type
- Alarm relay: 12VDC @ 2A NO/NC/jumper selectable 0.0-600 sec.
- Serial port: supported for ACC995, LED display, relay board, printer (4800, N, 8, 1)
- Anti-pass-back: yes
- Door group: 255
- Time zone: 63
- Event storage capacity: 11,000
- Card reading range: 8-15cm (3.15"-5.91")
- Power: 9-24VDC, <5W
- Temperature: -20° C - 75° C (-4° F - 167° F)